SAFETY

All manufacture and Federal safety standards were tested and confirmed that Safety Belt Comfort could not impact manufacturers pre-tensioners and passed Federal Motor Vehicle Safety Standard 210 and 302.

                  Pre-tensioners                                    Crash Test Result

Safety Belt Comfort can never affect the reaction of the auto manufacturers installed pretensioners.  These hold you in your seat when they detect a crash signal. National Highway Traffice Safety Administration tested and confirmed, crash signal reaction not affected.Product was safety tested according to Federal Motor Vehicle Safety Standard 210 and 302.  Passing these tests means the shoulder belt did not move.  It held you firmly in your seat in this crash simulation test.Test was for a 6223 load for 40 seconds.  Attachment failure result was NONE.

Pre-tensioners pull the belts tight in case of a crash.  One is inside the door panel and the other is under the floor board.  When a crash signal is detected these pull the belts tight.  At some point the pull against the body is released by the limiters.

Product was crash tested according to Federal Motor Vehicle Safety Standard 210 and 302.  One test confirmed it held the belts in position, the shoulder belt did not move.  The other confirmed it is fire retardant. 

With this product you can ride without the annoying distraction of your shoulder belt rubbing in unwanted areas knowing your safety is protected.